Record Function; Record - Record - Yamaha A3000 Owner's Manual

You use the RECORD function to record a new sample.
Important
Before beginning to record, you must first use the other RECORDING-mode functions
to set up the recording environment.

RECORD - Record

Records a sample.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Use this function to record one or more samples.
• The function begins by displaying the "initial recording page" shown above — the
• The value shown above Knob 2 indicates the maximum length (in seconds) currently
Knob 1
Push the knob to move to the Program/Sample Selection screen. ( 95)
Knob 2
If you are in the process of recording a series of samples, you can use this command to
delete all samples that you have just finished recording. This command is available only
if you are using serial recording (only if the Sample value in the Target page ( 230) is
set to New+), and only if you have already completed at least one recording in the
series.

RECORD Function

EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
- -
first of several pages that appear during recording. (If you have set the Sample value
in the Target page ( 230) to Replace, then >RETRY will appear in place of >GO
above Knob 5.)
available for your recording.
RECORD Function
Knob 3 Knob 4
- -
-
Select P/S
>ALLDEL
Chapter 6 RECORDING Mode
Knob 5
-
223