Lfo - Ptchmod (Pitch Modulation) - Yamaha A3000 Owner's Manual

LFO Function

LFO - PtchMod (Pitch Modulation)

Sets LFO pitch modulation.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 2
Knob 3
Chapter 5 EDIT Mode
206
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
This page determines how the LFO waveform modulates the sample's pitch.
Change Page
• Turn the knob to change to a different page within the LFO function. Available pages
are: Common, FltrMod, PtchMod (this page), and AmpMod.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Depth
This value sets the degree by which the pitch is modulated by the LFO waveform. Higher
values produce stronger modulation.
PhaseInvert
Set this value to on if you want to invert the waveform used to modulate the pitch.
If the setting is on, the A3000 modulates the pitch using the inverse of the selected LFO
waveform. (The inverse is obtained by rotating the actual LFO waveform 180 degrees
with respect to the time axis. The actual LFO waveforms are shown on page 204.)
CONTROL
MIDI / CTRL
Turn Knob 1 to select PtchMod.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= 0,...,127
= off, on
Knob 4 Knob 5
- -
- -
Select P/S