Lfo - Fltrmod (Filter Modulation) - Yamaha A3000 Owner's Manual

LFO - FltrMod (Filter Modulation)

Sets LFO filter modulation.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
This page determines how the LFO waveform acts upon (modulates) the filter cutoff
frequency.
Important
These settings are meaningless if the Type parameter on the Filter page ( 182) is set to
Bypass.
Knob 1 Change Page
• Turn the knob to change to a different page within the LFO function. Available pages
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Depth
Knob 2
This value sets the degree by which the filter's cutoff frequency is modulated by the LFO
waveform. Higher values produce stronger modulation.
PhaseInvert
Knob 3
Set this value to on if you want to invert the waveform used to modulate the filter.
If the setting is on, the A3000 modulates the cutoff frequency using the inverse of the
selected LFO waveform. (The inverse is obtained by rotating the actual LFO waveform
180 degrees with respect to the time axis. The actual LFO waveforms are shown on page
204.)
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
are: Common, FltrMod (this page), PtchMod, and AmpMod.
= 0,...,127
= off, on
Turn Knob 1 to select FltrMod.
Knob 3 Knob 4
-
- -
Select P/S
Chapter 5
LFO Function
Knob 5
-
-
EDIT Mode
205