Yamaha A3000 Owner's Manual page 122

EASY EDIT Function
Knobs 4, 5
Chapter 4 PLAY Mode
120
Poly/Mono
Poly/Mono switch
Poramento Portamento on/off
AlternateGrp
"Alternate group" select
Main Output
Main Output select
Main Out level
Output level to main output
Assign Output
Assignable-output select
Assign Out Lvl
Output level to assignable output
MIDI ReceiveCH
MIDI Receive Channel
MIDI Control MIDI Control enable/disable‡
* You can use these settings only to reduce the sample's internally-set key range. Set-
tings that would increase the internally-set key range are ineffective. (See next page.)
† You can use these settings only to reduce the sample's internally-set velocity range.
Settings that would increase this velocity range are ineffective. (See next page.)
‡ Selects whether the sample's own control settings are effective or ineffective.
Value
= parameter value
Turn either of these knobs to set the value for the selected parameter. Available values
differ for each parameter.
• Values preceded by a + or - sign are applied as offsets to the sample's own setting. The
applied value (sample setting plus offset) is indicated in parentheses to the right of
the offset value.
• If you set the value to =Sample, the program will use the sample's own setting.
• The Key Limit and Velocity Limit settings can be used only to reduce the sample's
locally set keyboard range and velocity range. You cannot set the Limit Low value
below the sample's own low-limit setting; you cannot set the Limit High value above
the sample's high-limit setting. For example, if the sample's locally set key range is
"C2 to B3", then you may adjust the range to "C2 to B2," but not to "C2 to B4."
174
174
208
176
176
176
176
208
210