Filter - Eq (Equalization) - Yamaha A3000 Owner's Manual

FILTER - EQ (Equalization)

Sets the sample's equalization.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
Knob 1 Change Page
• Turn the knob to change to a different page within the FILTER function. Available
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Freq
Knob 2
Turn the knob to set the equalizer's frequency point.
Gain
Knob 3
This value sets the gain at the equalizer's frequency point.
Width
Knob 4
This value determines the width of the emphasis or attenuation band. Note that smaller
values increase the width, while larger values decrease the width.
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
This page sets up the sample's 1-band equalizer.
pages are: Filter, FltSens, FltScale, and EQ (this page).
= 32Hz,...,16.0kHz
= -12dB,...,+12dB
= 1.0,...,2.0
FILTER Function
Turn Knob 1 to select EQ.
Knob 3 Knob 4
- -
Select P/S
Chapter 5
Knob 5
-
-
EDIT Mode
187