Eg - Fegrate (Filter-Eg Rates) - Yamaha A3000 Owner's Manual

EG Function

EG - FEGRate (Filter-EG Rates)

Sets the rates for the filter EG.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Chapter 5 EDIT Mode
192
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page together with the FEGLevel page ( 194) to set up the sample's FEG (filter
envelope generator). The FEG determines how the filter's cutoff frequency shifts over
time as each note plays out.
Frequency (+)
Specified Cutoff
Frequency*
Frequency (-)
Note On
Use the FEGRate page (this page) to set the rates (attack, decay, and release rates). Use
the FEGLevel page to set the levels (initial, attack, sustain, and release levels).
* "Specified Cutoff Frequency" is the value set by the Cutoff parameter on the Filter
page ( 182).
CONTROL
MIDI / CTRL
Turn Knob 1 to select FEGRate.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
-
- -
Initial Level
Sustain Level
Attack Level
Attack Rate Decay Rate
Knob 4 Knob 5
- -
Release Level
Release Rate
Note Off
Time