Yamaha A3000 Owner's Manual page 45

Deleting and Redoing
If the recording results are not satisfactory, please use the following procedure to delete
the recorded sample. Then record the sample again as described in the previous section.
Procedure
1. Select PLAY mode, and then select the SAMPLE function (second function
button).
Press the COMMAND key.
2.
Memo
The COMMAND key calls up a command screen that you use to execute a specific command. The
command that appears depends on the current mode and function.
Turn Knob 1 to select the >DELETE page.
3.
Be sure that Type (Knob 2) is set to Smp.
4.
If necessary, turn Knob 2 to change the setting to Smp.
Turn Knob 4 to select the name of the sample to be deleted.
5.
In this case, you want to set the value to _NewSample.
PLAY
PROGRAM SAMPLE
EDIT
TRIM / LOOP MAP / OUT
RECORD SETUP
REC
PROGRAM SAMPLE
DISK
TOTAL EQ PANEL PLAY
UTILITY
The screen looks like this.
EASY EDIT EFFECT SETUP CONTROL
FILTER EG LFO MIDI / CTRL
METER EFFECT EXT CTRL MONITOR
SEQUENCE VOLUME DISK IMPORT
SEQUENCE MASTER SYSTEM MIDI
Chapter 2
Starting Out
Trying It Out
43