Program Editing - Yamaha A3000 Owner's Manual

This section introduces you to some basic program-editing procedures.
Using Effects
1.
2.
3.

Program Editing

We will first set up an effect for the currently selected program (Pgm 001). In particular,
we will apply a "flanging pan" effect to the eeeee sample.
Procedure
Select EDIT mode, and then select the MAP/OUT function.
PLAY
PROGRAM SAMPLE
EDIT
TRIM / LOOP MAP / OUT
RECORD
REC
PROGRAM SAMPLE
DISK
TOTAL EQ PANEL PLAY
UTILITY
Press Knob 1, and then turn Knob 2 or Knob 3 to select the Voice EE sample
for editing. Then press Knob 1 again.
Turn Knob 1 to select the Output page. Then turn Knob 2 to set MainOut to
Effect1.
The screen should now look like this.
Memo
The A3000 allows you to assign up to three effects (Effect1, Effect2, and Effect3) to each program.
You can then apply any one of these effects to each of the samples used by the program. The MainOut
setting determines which of the effects is applied to the sample. In this case, we will apply Effect1.
EASY EDIT EFFECT SETUP
FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SEQUENCE VOLUME DISK
SEQUENCE MASTER SYSTEM
ProgramEditing
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Chapter 2 Trying It Out
57