Yamaha A3000 Owner's Manual page 52

Next Step
Setting the Original Key and the Key Range
Chapter 2 Trying It Out
50
Notice that striking a key on your MIDI keyboard will replay all three of your samples at
the same time. For our first "sample edit" session, we will now set the samples so that
keyboard keys from C2 to B2 produce Voice AH, while keys C3 to B3 produce Voice EE,
and keys C4 to B4 produce Voice OH.
Procedure
Select EDIT Mode, and then select the MAP/OUT function.
1.
PLAY
PROGRAM
EDIT
TRIM / LOOP
RECORD
REC
PROGRAM
DISK
TOTAL EQ
UTILITY
Turn Knob 1 to select the KeyRnge page.
2.
The screen should now look like this.
Press Knob 1.
3.
The following screen appears.
Memo
You use this screen to select the program or sample that you want to edit. Always go to this screen to
select the appropriate item before you begin editing.
Turn Knob 2 or 3 to select the Voice AH sample for editing.
4.
Be sure that Voice AH is selected.
5. Press Knob 1 again.
The initial KeyRnge screen reappears.
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI