Yamaha A3000 Owner's Manual page 297

T-ch
Knob 3
• Use this knob to set the "Transmit" channel for the selected function key. The setting
determines the MIDI channel over which the Note-On message is transmitted.
• Set the value to Bch if you want to use the channel selected by the BasicCh param-
eter in the UTILITY | MIDI Receive page ( 305).
• Push the knob if you want to set the channel from an external MIDI device. The knob
indicator begins blinking, indicating that the A3000 is ready to receive MIDI input.
Now transmit any note to the A3000 over the appropriate channel; the A3000 detects
the channel and displays the value over the knob. Lock in the setting in by pushing
the knob again or changing to a different screen.
Note
Knob 4
• Use this knob to set the note to be played by the selected function key. The setting
determines the note value that the key transmits when sending a Note-On message.
• To set the value from an external MIDI device: Push the knob (so that the indicator
begins blinking), then transmit the appropriate Note-On value. (See explanation di-
rectly above.)
• You can use the Note setting in the UTILITY | SYSTEM Display page ( 302) to select
whether note values are shown by name ("C-2" to "G8") or by the corresponding
MIDI note number ("0" to "127").
Velocity
Knob 5
• Use this knob to set the velocity for selected function key. The setting determines the
velocity value that the key transmits when sending a Note-On message.
• To set the value from an external MIDI device: Push the knob (so that the indicator
begins blinking), then transmit any note using the appropriate velocity. (See expla-
nation directly above.)
• You can use the Note setting in the UTILITY | SYSTEM Display page ( 302) to select
whether note values are shown by name ("C-2" to "G8") or by the corresponding
MIDI note number ("0" to "127").
= 1,...,16, Bch
= C-2,...,G8
= 1,...,127
PANEL PLAY Function
MIDI IN
MIDI IN
MIDI IN
Chapter 8 UTILITY Mode
295