Map/Out - Pitch - Yamaha A3000 Owner's Manual

MAP/OUT Function

MAP/OUT - Pitch

Sets the sample's pitch characteristics.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 2
Knob 3
Knob 4
Knob 5
Chapter 5 EDIT Mode
178
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to set the sample's tuning and pitch characteristics.
Change Page
• Turn the knob to change to a different page within the MAP/OUT function. Available
pages are: KeyRnge, VelRnge, Lvl&Mode, Output, Pitch (this page), Expand, and LvlScale.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Coarse
Turn the knob to adjust the sample's pitch, in semitone increments.
Fine
Turn the knob to fine-tune the sample's pitch. Each click adjusts the pitch by 1.171875
cent. (Note: 100 cents = 1 semitone)
Fixed
Set this parameter on if you want the sample to play out at the same pitch over its entire
key range.
Random
Use this setting to impart a slight, random pitch variation to the sample's pitch.
Set to 0 to eliminate all random variation. Increase the value to produce a greater range
of variation.
Note that this variation is applied to each note at the start of its playback. This setting
does not affect how pitch develops once the note has started playing.
CONTROL
MIDI / CTRL
Turn Knob 1 to select Pitch.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= -127,...,+127
= -63,...,+63
= off, on
= 0,...,63
Knob 4 Knob 5
--
Select P/S