Installing A Cable Outside A Pre-Fab. Module; Installing External Input Power Cables - Huawei FusionModule1000A20 Installation Manual
Prefabricated all-in-one data center
Hide thumbs
Also See for FusionModule1000A20:
- Maintenance manual (140 pages) ,
- Commissioning manual (120 pages) ,
- Installation manual (105 pages)
Table of Contents
Advertisement
FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
7
7.1 Installing External Input Power Cables
Prerequisites
Pre-fab. modules and external cable trays have been installed.
Preparations
Tools: crimping tool, Phillips screwdriver, adjustable wrench, cable cutter, heat gun
Materials: cable tie, cable, terminal, heat shrink tube
Skill requirement: skilled technician
Procedure
Step 1 Open the door of the main input PDB.
Step 2 Route the external input power cables into the pre-fab. module through the feeder window, as
shown in
Issue 02 (2020-01-15)
Installing a Cable Outside a Pre-fab.
A.1 Cable Installation
Copyright © Huawei Technologies Co., Ltd.
7 Installing a Cable Outside a Pre-fab. Module
Techniques.
Module
70
Advertisement
Table of Contents
