Huawei FusionModule1000A20 Installation Manual page 30

Prefabricated all-in-one data center

Hide thumbs Also See for FusionModule1000A20:

Table of Contents

FusionModule1000A20 Prefabricated All-in-One Data

Center

Installation Guide

Figure 4-10 Securing pre-fab. module bases

Step 7 Level all bases.

Issue 02 (2020-01-15)

Measure the height of each base using the level gauge, and record the height on its upper

surface using the marker.

Identify the base with the highest upper surface, and use it as the adjustment reference.

Select spacers based on the height difference between a base and the reference base, and

add spacers to adjust the height. Ensure that the height difference is within 5 mm after

adjustment.

4 Installing Pre-fab. Modules

Table of Contents