FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
(A) Nut
(C) Flat washer
6.
7.
8.
----End
Issue 02 (2020-01-15)
Figure 4-4 Installing an expansion bolt (unit: mm)
Reinstall the angle steel brackets to the concrete platforms with the expansion bolts
securing the angle steel brackets. Remount the flat washers, spring washers, and nuts on
the expansion bolts and tighten the expansion bolts in sequence using a torque wrench.
Figure 4-5 Securing an angle steel bracket
Remove the rubber plugs from the pre-fab. module fixing holes using a Phillips
screwdriver.
Secure the angle steel brackets to the pre-fab. module using bolt assemblies.
Copyright © Huawei Technologies Co., Ltd.
4 Installing Pre-fab. Modules
(B) Spring washer
(D) Wooden block
18