Huawei FusionModule1000A20 Installation Manual page 62

Prefabricated all-in-one data center

Hide thumbs Also See for FusionModule1000A20:

Table of Contents

FusionModule1000A20 Prefabricated All-in-One Data

Center

Installation Guide

Secure the temperature probe to the position on the water refill and drainage pipe. The position is the

point where the electric heating belt is wrapped 50 cm long around the water refill and drainage pipe

from the water refill and drainage pipe port.

Figure 6-22 Secure the temperature probe

Step 3 Connect the electric heating belt and temperature probe to the controller.

Issue 02 (2020-01-15)

6 Installing Devices Inside the Pre-fab. Module

Table of Contents