Huawei FusionModule1000A20 Installation Manual page 48

Prefabricated all-in-one data center

Hide thumbs Also See for FusionModule1000A20:

Table of Contents

FusionModule1000A20 Prefabricated All-in-One Data

Center

Installation Guide

Issue 02 (2020-01-15)

Figure 6-4 Cuting the glue

Remove the connection box cover.

Figure 6-5 Removing the connection box cover

Use a Phillips screwdriver to remove the screws reserved on the covers of the air intake

and exhaust vent on the pre-fab. module. And then cut the glue between the air intake

and exhaust vent covers inside the pre-fab. module using a utility knife.

6 Installing Devices Inside the Pre-fab. Module

Table of Contents