Optional) Connecting Dg Start/Stop Cables (Ats Input) - Huawei FusionModule1000A20 Installation Manual
Prefabricated all-in-one data center
Hide thumbs
Also See for FusionModule1000A20:
- Maintenance manual (140 pages) ,
- Commissioning manual (120 pages) ,
- Installation manual (105 pages)
Table of Contents
Advertisement
FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
Figure 7-5 Connecting the input cable of PDB (02404923)
Step 4 Close the door of the main input PDB.
----End
7.2 (Optional) Connecting DG Start/Stop Cables (ATS
Input)
Prerequisites
Pre-fab. modules and external cable trays have been installed.
Procedure
Step 1 Connect the DG start/stop cable to the XT2 terminal block.
Issue 02 (2020-01-15)
Copyright © Huawei Technologies Co., Ltd.
7 Installing a Cable Outside a Pre-fab. Module
74
Advertisement
Table of Contents
