Removing Transport Protection Materials; Removing Transport Protection Materials For Fire Extinguishing Devices - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
8

Removing Transport Protection Materials

8.1 Removing Transport Protection Materials for Fire
Extinguishing Devices
Prerequisites
The pre-fab. modules have been installed.
Context
Protection materials are installed for fire extinguishing devices to prevent them from falling
off or being damaged due to strong vibration during FusionModule1000 transportation.
Preparations
Tools: step ladder
Materials: none
Documents: fire extinguishing device layout diagram
Skill requirement: common technician
Procedure
Step 1 Understand the internal layout of the FusionModule1000 by referring to the fire extinguishing
device layout diagram.
Step 2 Remove the transport protection materials from the top of the aisles inside the
FusionModule1000.
Table 8-1 Transport protection materials to be removed
No.
Issue 02 (2020-01-15)
To prevent damage to aisle floors in the FusionModule1000, you are advised to remove the protective
films after the FusionModule1000 is installed.
Copyright © Huawei Technologies Co., Ltd.
8 Removing Transport Protection Materials
Device Protection Materials
77