Table of Contents
Advertisement
FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Step 3 (Optional) Hold the end cover of the PC light shade at both ends of the light and pull the end
cover downwards to remove the end cover. Hold the PC light shade, after the shade is
deformed and pull it downwards to remove it.
Figure 5-7 Removing the end cover of a PC light shade
Step 4 Rotate the light tube to make the tube pins aligned with the grooves of the light holder, and
then remove the damaged light tube.
Step 5 Insert the pins at both ends of a new light tube into the light holder and rotate the light tube to
tighten it.
Step 6 (Optional) Reinstall the PC light shade and end cover of the PC light shade.
Step 7 (Optional) Hold the PC plate and move it towards the edge of the ceiling to locate it inside the
limiting structure.
----End
Issue 04 (2018-01-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
75
Advertisement
Table of Contents
