Table of Contents
Advertisement
FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Figure 5-43 Removing the fixing plate
Step 3 Remove cables from the fire alarm control panel batteries, and remove the batteries.
Step 4 Install the new batteries to the proper positions of the fire alarm control panel.
Step 5 Connect battery cables to the fire alarm control panel in the same way.
Figure 5-44 Connecting battery cables
Distinguish the positive and negative battery terminals when connecting battery cables.
Step 6 Use a Phillips screwdriver to secure the battery fixing plate.
Issue 04 (2018-01-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
119
Advertisement
Table of Contents
