Replacing An Electronic Lock - Huawei FusionModule 1000A40 Maintenance Manual

FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Figure 5-25 Removing an exit button
Step 2 Install a new exit button and reconnect cables.
Step 3 Check whether the new exit button is working properly.
----End
Follow-up Procedure
Dispose of the removed exit button that is confirmed faulty.

5.3.8.4 Replacing an Electronic Lock

Prerequisites


Impact on the System
None
Issue 04 (2018-01-05)
If the pre-fab. module door can be opened using the exit button, and the door opening event is logged,
the new exit button is working properly.
An electronic lock needs to be replaced.
A spare electronic lock of the same model is available and functional.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
100