Maintenance; Routine Maintenance - Huawei FusionModule 1000A40 Maintenance Manual

FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)

3.1 Routine Maintenance

Table 3-1 Routine maintenance checklist
Cate
gory
Mana
geme
nt
syste
m
Issue 04 (2018-01-05)
Item Method
FusionMo Choose Alarm >
dule1000 Current Alarms
alarms on the home page
of the
management
system to view
alarms.
Camera Choose
images Configuration >
and
Camera
coverage Management >
Video Camera
Management,
right-click a
camera name on
the right side, and
view the video
images captured
by the camera.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

Maintenance

Expected Troubleshooting
Result
No alarm is If an alarm is displayed in
displayed in the the alarm information area,
alarm perform the following
information area. operations:
1. Clear the alarm by
following instructions in
iManager NetEco
Product Document -
(NetEco Version).
2. Check whether cables are
connected properly and
rectify faults.
You can view If no video image is
the video displayed:
images.
1. Connect the camera cable
again.
2. If the cable is correctly
connected, replace the
camera.
If the camera is normal but
no video image is displayed:
1. Connect the VCN500
cable again.
2. If the cable is correctly
connected, replace the
VCN500.
3 Maintenance
8