Table of Contents
Advertisement
FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Preparations
Tools: Phillips screwdriver, flat-head screwdriver, step ladder, protective gloves
Materials: spare emergency light
Documents: none
Skill requirement: fire engineer
Procedure
Step 1 Disconnect the power plug of the emergency light.
Figure 5-98 Removing the power plug
Step 2 Remove the protective cover of the emergency light.
Step 3 Loosen the emergency panel using a flat-head screwdriver, and remove the panel.
Step 4 Remove screws from the emergency light base using a Phillips screwdriver, and remove the
base.
Step 5 Install the new emergency light base and the panel in the same way.
Step 6 Remove the red pin, and reinstall the protective cover.
Figure 5-99 Position of the red pin
Issue 04 (2018-01-05)
For the diagrams, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
175
Advertisement
Table of Contents
