7360 ISAM FX-8 shelf cabling
14.10.1
The required cable is an MDF cable with two CHAMP100 connectors; see
Figure 143.
Figure 143
14.10.2
The cable is plugged into the connectors on the LT card and the splitter card, and is
locked into place with standoffs and nuts.
14.10.3
The combo cable must be connected between the voice LT card and the splitter card
in the 7360 ISAM FX-8. The excess cable length must be routed to the left side in the
rack, see Figure 144.
272
Cable type
Combo cable
Front view
25
1
100
76
Connector B
See Appendix
Note 1 —
connectors.
See the 7360 ISAM FX Product Information Guide for
Note 2 —
ordering information.
Connection/locking
Cabling
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
25
for the pinning of the CHAMP100
DRAFT
Front view
76
100
1
25
Connector A
No3454
Issue: 09