Inserting The Cable Connector Into A Vl Port On The Ndps-B Card; Vl Cable Exit Areas - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

7360 ISAM FX-12 shelf cabling
Figure 92
6
Figure 93
190

Inserting the cable connector into a VL port on the NDPS-B card

VL cable
Route the VL cable through the appropriate cable exit area of the shelf; see Figure

VL cable exit areas:

•
for a vertically mounted shelf (cards oriented vertically):
•
for a VL cable connected to ports VL1 though VL4 on the NDPS-B card, route the cable
straight up through the cable exit area above the NDPS-B card
•
for a VL cable connected to ports VL5 though VL8 on the NDPS-B card, route the cable
up and then towards the PWIO-B card so that the VL cable exists the shelf above PWIO-
B card
VL cable exit areas
VL
1
2
3
4
5
6
7
8
PWR
ACT
ALM
GFC LT1 LT2
Alarm
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
VL port
VL1
LT3 LT4 LT5 LT6 NTA NTIO NTB LT7 LT8 LT9
ENERGY HAZARD
ROATING FAN BLADES
KEEP FINGERS AWAY FROM
TOP AND BOTTOM OF FAN TRAY
DRAFT
VL2
23722
LT10 LT11 LT12
24949
93 for the
Issue: 09