ANSI Hardware Installation Manual
Figure 101
1
2
Issue: 09
NT card slots in 7360 ISAM FX-12
A: 60A
B: 60A
External Alarms
BITS
NTA
GND
NTB
7360 ISAM FX-12
Remote
Craft
BAT A
BAT B
Alarms
Min.
Maj. Crit.
ACO
GFC
LT1
LT2
LT3
Alarm
Remove the NT card from its ESD protective bag. Wear the antistatic wrist strap.
Ensure that the insertion/extraction tabs on the card are in the unlocked position.
Warning 1 — Ensure that all protective coverings on the shelf
backplane connectors are removed prior to installation of the cards,
otherwise damage to the shelf pins and the connectors may occur.
Warning 2 — Attempting to insert a misaligned card may cause bent
pins on the backplane connector. Ensure that the card is properly
positioned in the slot and aligned with the backplane connector before
securing the insertion/extraction tabs.
3HH-12893-AAAA-TCZZA
Installing cards in the 7360 ISAM FX-12 shelf
NT A
NT B
LT4
LT5
LT6
NTA
NTIO
NTB
LT7
LT8
LT9
ENERGY HAZARD
ROATING FAN BLADES
KEEP FINGERS AWAY FROM
TOP AND BOTTOM OF FAN TRAY
DRAFT
LT10
LT11
LT12
24896
203