Figure 146 Mdf Cable Line Connection On 7360 Isam Fx-8 - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

ANSI Hardware Installation Manual
Procedure 58
Proceed as follows to connect the MDF cables for LINE and POTS to the LT card with integrated
splitter:
1
Figure 146 MDF cable LINE connection on 7360 ISAM FX-8
2
3
4
Issue: 09
MDF cabling procedure for LT cards with integrated splitter
Connect the MDF cable for the LINE to the right-hand CHAMP connector on the LT card with
integrated splitter, as shown in Figure 146.
xDSL
POTS LINE
B-40A
Energy Hazard
A-40A
Secure the connector with standoffs and nuts.
Route and connect the other end of the MDF cable as per site practices.
Connect the MDF cable for the LINE to the left-hand CHAMP connector on the LT card with
integrated splitter, as shown in Figure 147.
3HH-12893-AAAA-TCZZA
7360 ISAM FX-8
Alarms
NTA GND NTB
External Alarms BITS TOD/IHZ Remote Craft BAT A BAT B
DRAFT
7360 ISAM FX-8 shelf cabling
FAN
Critical
Major
Minor
ACO
23895
275