ANSI Hardware Installation Manual
17.3.2
The following parts are required:
•
•
•
•
•
•
•
Issue: 09
Parts list
7360 ISAM FX-4 shelf (NFXS-F)
grounded 23 in. rack that can accommodate the 7360 ISAM FX-4 shelf
horizontal shelf mount kit rack containing:
•
shelf horizontal brackets (x2)
•
12-24 × 1/2 in. (12.7 mm) screws
•
6-32 × 3/8 in. (9.53 mm) screws
vertical shelf mount kit containing:
•
rack adapter brackets
•
pre-assembled top cross bracket, rear skirt and front skirt
•
pre-assembled shelf horizontal mount bracket and air intake baffle/drip tray
•
intumescent panel
•
top baffle
•
12-24 × 1/2 in. (12.7 mm) screws
•
M3 × 5/16 in. (8 mm) screws
•
M3 × 9/16 in. (14 mm) screws
•
M3 × 9/16 in. (14 mm) screws
•
12-24 × 1/2 in. (12.7 mm) screws
fan unit (BFAN-X)
general facilities card, if replacing (NGFC-G)
cables:
•
50-pin micro DSUB connector
•
DB-9 connector
•
RJ-45 connector
•
6-pin wire-wrap right angle header connector
•
120-pin FCI power blade connector
3HH-12893-AAAA-TCZZA
DRAFT
Installing a 7360 ISAM FX-4 shelf
331