Figure 196 Power Cable Routing For 7360 Isam Fx-4; Power Cable Routing And Connection - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

ANSI Hardware Installation Manual
18.5.3.2
The power cables are routed through the left side of the rack and can then be routed
to the power distribution terminal block located on the bottom of the shelf; see
Figure 196.
Figure 196
Procedure 77
Use the following procedure to connect the power cables on the 7360 ISAM FX-4.
1
2
Issue: 09

Power cable routing and connection

Power cable routing for 7360 ISAM FX-4
To connect power cables
Danger — Before connecting the power cables, make sure that the
power to the cables has been disconnected.
Note 1 — Power cables connect the PDF directly to the shelf.
Note 2 — All hardware shown in Figure
7360 ISAM FX-4.
Note 3 — Avoid sharp bends in cables. Use the proper bend radius
when installing cables.
Ensure the power to the cables has been disconnected.
Loosen the screws on the safety cover and remove the safety cover; see Figure 197.
3HH-12893-AAAA-TCZZA
197
DRAFT
7360 ISAM FX-4 shelf cabling
22395
is provided with the
351