Table 27 1Pps-Ttl Interface Signal List; Connector Pinning On Nt Card - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

ANSI Hardware Installation Manual

26 Connector pinning on NT card

26.1 Overview
This section describes the following connector signals and pinnings for the
7360 ISAM FX NT cards:
•
•
•
•
26.2 1PPS-TTL interface signal
Table
Table 27
Signal name
1PPS-TTL
Shield
26.3 10 MHz-GPS interface signal
Table
Issue: 09
26.1 Overview
26.2 1PPS-TTL interface signal
26.3 10 MHz-GPS interface signal
26.4 ToD/PPS interface signal
26.5 Local craft interface
1PPS-TTL interface signal
10 MHz-GPS interface signal
ToD/PPS interface signal
Local craft interface
27 describes the signal from the 1PPS-TTL interface on the SMA connector.
1PPS-TTL interface signal list
Type
Output
Input
Input
28 describes the signal for the 10 MHz GPS interface on the SMA connector.
3HH-12893-AAAA-TCZZA
Description
1PPS output, PTP slave mode
(single-ended, 50Ω)
1PPS input, PTP master mode
(single-ended, 50Ω)
Frame ground
DRAFT
Connector pinning on NT card
453