Parts List; Recommended Tools - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

Installing racks
4.3.1
General installation components include the following:
•
•
•
•
Seismic installation components include the following:
•
•
•
Non-seismic installation components include the following:
•
•
4.3.2
The following tools are recommended:
•
•
•
•
•
•
66

Parts list

7360 ISAM FX supported rack
7360 ISAM WM supported rack
adapter plate assembly kit; one required per rack (not included with rack; order
separately)
concrete anchor setting tool; one required per installation site (not included with
rack; order separately)
seismic rack extender; one optional per rack (not included with rack; order
separately). Order the height of seismic rack extender required to convert the 7-ft
rack to the height of the CO where the product is being installed. This component
extends the 7-ft rack, connecting to the CO overhead cable raceway rails only—
it does not allow additional shelf installation.
seismic anchor bolt, size M12/25 (12 mm diameter bolt with 25 mm grip), four
required per rack (not included with rack; order separately)
seismic anchor bolt, size M12/50 (12 mm diameter bolt with 50 mm grip), four
required per rack (not included with rack; order separately)
The standard anchor is M12/25. In applications where
Note —
the floor is not level and requires shimming greater than 0.125
in. (3.175 mm), the longer anchor (M12/50) may be required. In
all cases, make sure that the minimum embedment mark on the
anchor is at or below the level of the concrete.
floor mounting hardware kit; one kit required per rack (not included with rack;
order separately)
anchor bolt, size M12/25 (12 mm diameter bolt with 25 mm grip), two or four
required per rack dependent on installation practice (not included with rack; order
separately)

Recommended tools

extension cord, 50 ft (15 m)
flathead and #2 Phillips screwdrivers
handling materials, tools, method, and packing material for hazardous waste
material removal, if required
level, 3 ft (1 m)
rotary impact drill and associated drill bits
safety glasses
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
DRAFT
Issue: 09