Installing a 7360 ISAM FX-4 shelf
17.2.2
The following parts are required:
•
•
•
•
•
•
•
•
17.2.3
The following tools are recommended:
•
•
316
Parts list
7360 ISAM FX-4 shelf (NFXS-F)
grounded 19 in. EIA standard rack or 19 in. seismic standard rack that can
accommodate the 7360 ISAM FX-4 shelf
horizontal shelf mount kit containing:
•
12-24 × 1/2 in. (12.7 mm) screws
•
mounting brackets not required
vertical shelf mount kit containing:
•
pre-assembled top cross bracket, rear skirt and front skirt
•
pre-assembled shelf horizontal mount bracket and air intake baffle/drip tray
•
intumescent panel
•
top baffle
•
12-24 × 1/2 in. (12.7 mm) screws
•
M3 × 5/16 in. (8 mm) screws
•
M3 × 9/16 in. (14 mm) screws
•
M3 × 9/16 in. (14 mm) screws
•
12-24 × 1/2 in. (12.7 mm) screws
fan unit (BFAN-X)
10 AWG power lug
general facilities card, if replacing (NGFC-G)
cables:
•
50-pin micro DSUB connector
•
DB-9 connector
•
RJ-45 connector
•
6-pin wire-wrap right angle header connector
•
120-pin FCI power blade connector
Recommended tools
screwdrivers
protective gloves
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
DRAFT
Issue: 09