Figure 204 Mdf Cable Line Connection On 7360 Isam Fx-4; Figure 205 Mdf Cable Pots Connection On 7360 Isam Fx-4 - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

ANSI Hardware Installation Manual
Procedure 79
Proceed as follows to connect the MDF cables for LINE and POTS to the LT card with integrated
splitter:
1
Figure 204 MDF cable LINE connection on 7360 ISAM FX-4
2
3
4
Figure 205 MDF cable POTS connection on 7360 ISAM FX-4
Issue: 09
MDF cabling procedure for LT cards with integrated splitter
Connect the MDF cable for the LINE to the right-hand CHAMP connector on the LT card with
integrated splitter, as shown in Figure 204.
xDSL
POTS LINE
External Alarms
N594
7360 ISAM FX-4
Secure the connector with standoffs and nuts.
Route and connect the other end of the MDF cable as per site practices.
Connect the MDF cable for the LINE to the left-hand CHAMP connector on the LT card with
integrated splitter, as shown in Figure 205.
xDSL
POTS LINE
External Alarms
N594
7360 ISAM FX-4
3HH-12893-AAAA-TCZZA
BITS TOD/IHZ Remote Craft BAT A BAT B FUSE
A B
1
2
3
NTA GND NTB
BITS TOD/IHZ Remote Craft BAT A BAT B FUSE
A B
1
2
3
NTA GND NTB
DRAFT
7360 ISAM FX-4 shelf cabling
Critical Alarms FAN
Major ACO
Minor
23896
Critical Alarms FAN
Major ACO
Minor
23897
359