7368 ISAM CPE A-240Z-A Product Guide
Procedure 32
Port forwarding configuration
1
Figure 41
Table 36
Field
Application Name
WAN Port
LAN Port
Internal Client
Protocol
Enable Mapping
WAN Connection List
Issue: 01
All manuals and user guides at all-guides.com
Select Application > Port forwarding from the top-level menu in the Ethernet Gateway
window, as shown in Figure 41.
Port forwarding window
Table
36
describes the fields in the port forwarding window.
Port forwarding parameters
Description
Choose an application name from the drop-down menu
WAN port range
LAN port range
Choose a connected device from the drop-down menu and enter
the associated IP address
Choose the port forwarding protocol from the drop-down menu:
•
TCP
•
UDP
•
TCP/UDP
Select this checkbox to enable mapping
Choose a WAN connection from the drop-down menu
Note: only active devices are shown on this menu
3FE-46615-AAAA-TCZZA
Configure an A-240Z-A CPE
101