Scope Of Instructions; Inspection, Handling And Storage; Inspection; Handling - ABB AMVAC Manual

2.2 Scope of Instructions

The instructions are general in nature.
They cover requirements for receiving,
installation, and functional checks as
applied to ADVAC and AMVAC medium
voltage circuit breakers. These instruc-
tions do not attempt to cover all possible
issues that may arise during receiving to
commissioning of breakers.
Information on particular installations
appears in the following:
· Bills of Materials that list electrical
devices and equipment.
· Single line drawings showing power
connections.
· Elementary and schematic
diagrams.
· Connection diagrams
3 Inspection, Handling and

Storage

3.1 Inspection

Before shipment,
inspected and marked with its rating.
Breakers are shipped in the open and
discharged condition in separate crates.
Upon receipt of the equipment, use the
breaker commissioning check list in the
back of this document to examine the
shipment for damage
components. Follow
outlined in the next section.

3.2 Handling

Transport breakers upright using proper
lifting equipment. Take the high center of
gravity into account. Carry out loading
operations only when it has been ensured
that all precautionary measures to protect
personnel and materials have been taken
into consideration.
Courtesy of NationalSwitchgear.com
the equipment is
or missing
the

procedures

3.3 Storage
For circuit breakers, store upright in their
original shipping carton
indicated on the shipping crates.
breaker installation and operation manual
for details on breaker storage.
4 Procedures

4.1 Receiving inspection

Inspect shipping crate for damages, and
note condition of tip & tell if equipped. Check
the contents against the packing list before
discarding any packing material. Check the
consignment for completeness and lack of
any damage (e.g.
detrimental effects). In case of doubt, the
packing must be opened and then properly
resealed, when intermediate storage is
necessary. If any quantities are short, or
defects or transport damage is noted, these
must be documented on the respective
shipping document. Notify ABB and the
carrier at once of any discrepancies. If there
is damage from improper handling, file a
claim for damages at once with the carrier
and notify ABB.
Figure 4.1 Rating label
Note: ABB is not responsible for damage, after
delivery of the equipment to the carrier
.
oriented as
See
moisture and its
Page 2