Unpacking And Handling - ABB SACE Emax E2.2 Installation, Operation And Maintenance Instructions For The Installer And The User

2 - Unpacking and handling

Opening the packaging
10 | © 2019 ABB | 1SDH001000R0002 - ECN000109166 - Rev. D
NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped packaging
pouch.
The following is the procedure for opening the packaging:
1. Cut the bands that wrap the packing box. See Figure 6 and Figure 7.
Figure 6
2. Open the upper part of the packing box. See Figure 8.
3. Remove the packing box by lifting it upwards. See Figure 9.
Figure 8
Figure 7
Figure 9
Continued on the next page
Management operations | 2 - Unpacking and handling
ABB | SACE Emax 2