Saving The Filter Settings - Siemens SINUMERIK FM-NC Installation And Startup Manual

Hide thumbs Also See for SINUMERIK FM-NC:

Table of Contents

Saving the filter settings

The filter settings are saved area-specifically in the file C:\MMC2\IB.INI. This file

must be backed up before an MMC software upgrade and restored after up-

grading to retain the settings.

For information about data backup see

SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition

6 Assigning Parameters to the Control and the PLC Program

Machine data masking filter (SW 4.2 and higher)

/IAD/ Chapter 11, Data Backup

Table of Contents