Siemens SINUMERIK FM-NC Installation And Startup Manual page 273

04.00
03.96
Delete a SW
If you wish to delete the image of a software version from the "Images" directory,
proceed as follows:
version from the
"Images" directory
1. Switch on the control and select start-up mode (press key 6 when DOS/Win-
2. Select menu "7: Backup/Restore"
3. Enter password
4. Select menu "4 Partitions Backup/Restore"
5. In order to delete the image of a software version, select menu
6. Select the software version of your choice from the displayed list.
7. The deleted software version is removed from the "Images" directory and
SW Norton Ghost
Two versions of the Norton Ghost software are available on the control in V 5.2
and higher:
S
S
The data format has been changed in Norton Ghost version 5.1c and later
which means that earlier Norton Ghost versions, i.e. < V 5.1c, cannot read the
new data format.
If the current version 6.01 is needed (because, for example, a later version is
installed on the PG/PC), it can be activated via the Service menu:
1. Switch on the control and select start-up mode (press key 6 when DOS/Win-
2. Select menu "7: Backup/Restore"
3. Enter password
4. Select option "Switch to other version of GHOST". The active version of Nor-
Transfer via
When the software is transferred via the parallel interface LPT, it is not possible
parallel interface to mix the Norton Ghost software with old (< V 5.1c) and new (>V 5.1 b) ver-
sions. It must be ensured that a compatible data format is transferred via this
LPT
interface:
S
S
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
11.5 Several SW versions on one MMC 103 (SW 5.2 and higher)
dows screen appears),
option "4: Delete Image"
therefore no longer listed when you select menu option "3: Partitions Re-
store".
Norton Ghost Version 5.1b (standard)
Norton Ghost Version 6.01
dows screen appears),
ton Ghost is displayed at the top of the screen.
Norton Ghost V5 up to and including V5.1b
Norton Ghost V5.1c up to and including V6.x
11 Data Backup
or
11-273
11