Output Of Drive Data Via V24 On Mmc102/103 - Siemens SINUMERIK FM-NC Installation And Startup Manual

03.96
11.3.2 Output of drive data via V.24 on MMC102/103
Drive data
The following types of drive data are used:
S
S
S
data
Boot file Diagnosis\FDD data
Boot file Diagnosis\MSD data
Drive MD FDD DIAGNOSIS\MachDat/FDD
Drive MD MSD DIAGNOSIS\MachDat/MSD
Where are the boot
The boot files are stored in the FDD data and MSD data directories.
files stored?
Note
The boot files can only be output as binary files with V.24 setting archive for-
mat. The boot files must have been saved before output (save boot files soft-
key). The boot file data backup (in binary format) can only be loaded back onto
the same software version.
Drive MD
The drive machine data must be saved initially in the Start-up\Machine data\File
function area before they can be output via V.24.
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
Boot files (HSA.BOT)
Boot files (VSA.BOT)
Drive machine data (*.TEA)
Directory
VS1.BOT
HS1.BOT
*.TEA
*.TEA
FDD data
VS1.BOT
VS2.BOT
MSD data (HS1.BOT)
DIAGNOSIS
MachDat/FDD
MachDat/MSD
11.3 Data backup via MMC 102/103
Name Meaning
Boot file for 1st axis
Boot file for 1st spindle
Drive machine data file for FDD saved
under IBN/MD/Filefunction. A name
must be allocated.
Drive machine data file for MSD
saved under IBN/MD/Filefunction.
A name must be allocated.
11 Data Backup
11-257
11