Operation, Basic Display - Siemens SINUMERIK FM-NC Installation And Startup Manual

05.98
03.96
10.8.2

Operation, basic display

Fig. 10-8
Basic display
You can access the basic display of the trace function with the softkeys
Servo trace Drives/servo \ Servo trace.
Fig. 10-9
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
The cursor is controlled us-
ing the arrow keys on the
operator panel or with the
mouse.
If the cursor is placed on a
list box, press the insert key
to open the list box.
You page in the list
using the arrow
keys.
You accept a value
using the
input key.
Cursor control
Basic display of servo trace
10 Drive Optimization with Start-Up Tool
10.8 Trace function (SW 4.2 and higher)
Toggle key
10
10-223