Output Of Drive Data Via V24 On The Mmc102/103 - Siemens SINUMERIK FM-NC Installation And Startup Manual

11 Data Backup
11.3 Data backup via MMC 102/103
11.3.3 Output of drive data via V.24 on the MMC102/103
NC data
11-258
NC data are all data stored in the SRAM of the NC (excluding the part program
and cycles).
The following data are stored in the NC active data area:
S
NC machine data (MD11210 UPLOAD_MD_CHANGES_ONLY =1)
S
Option data
S
Setting data
S
Tool/machine data
S
ZO
S
R parameters
S
Global user data
S
Protection zones
S
Compensation data
– Measuring system error compensation (LEC=EEC)
– Sag/angularity compensation (CEC)
– Quadrant error compensation (QEC)
Fig. 11-3 NC active data
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
 Siemens AG 2000 All Rights Reserved
03.96