Siemens SINUMERIK FM-NC Installation And Startup Manual page 229

05.98
03.96
Fig. 10-12 Scaling of Graph1 and Graph2
Graph
parameterization
Scaling field
On the "Scaling" field, you can select between automatic and manual (fixed)
scaling using the toggle key.
Y max
For every trace you can enter the scaling in the input fields Y max and Y min.
Y min
You can only select the input fields if the type of scaling is "fixed".
fields
With "fixed" scaling the inputs are only transferred to the graph when you exit
the display.
Markers field
In the "Markers" field , you can assign the marker to the appropriate traces with
the toggle key.
In Graph1 you can select the marker for trace 1 or trace 2 and in Graph2 for
trace3 or trace4.
Softkeys
With the softkeys Graph1 or Graph2, you can display either graphs as a large
Graph1... single display. You can switch back with the vertical softkeys
Graph1 + Graph2.
Graph2...
Softkey
With the softkey Print graph you can print the displays
(Graph1/Graph2 or Single displays) on the printer selected in the printer setup.
Print
graph
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
10 Drive Optimization with Start-Up Tool
10.8 Trace function (SW 4.2 and higher)
10
10-229