Siemens SINUMERIK FM-NC Installation And Startup Manual page 4

3ls
SINUMERIK
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A . . . . . New documentation.
B . . . . . Unrevised reprint with new Order No.
C . . . . . Revised edition with new status.
If factual changes have been made on the page since the last edition,
this is indicated by a new edition coding in the header on that page.
Edition
06.94
08.94
02.95
04.95
09.95
03.96
08.97
12.97
12.98
08.99
04.00
This manual is included in the documentation available on CD-ROM (DOCONCD)
Edition
04.00
Trademarks
SIMATICr, SIMATIC HMIr, SIMATIC NETr, SIROTECr, SINUMERIKr and SIMODRIVEr are Siemens
trademarks. The other designations in this publication may also be trade marks, the use of which by third
parties may constitute copyright violation.
Further information is available on the Internet under:
http://www.ad.siemens.de/sinumerik
This publication was produced with Interleaf V 7.
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority. Offenders
will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved.

Siemens AG 1994 – 2000. All rights reserved.
Order No. 6FC5 297–5AB10–0BP2
Printed in the Federal Republic of Germany

documentation
Order No.
6FC5 297–0AB10–0BP0
6FC5 297–0AB10–0BP1
6FC5 297–2AB10–0BP0
6FC5 297–2AB10–0BP1
6FC5 297–3AB10–0BP0
6FC5 297–3AB10–0BP1
6FC5 297–4AB10–0BP0
6FC5 297–4AB10–0BP1
6FC5 297–5AB10–0BP0
6FC5 297–5AB10–0BP1
6FC5 297–5AB10–0BP2
Order No.
6FC5 298–5CA00–0BG2
Remarks
A
C
C
C
C
C
C
C
C
C
C
Remarks
C
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
We have checked that the contents of this document correspond to
the hardware and software described. Nonetheless, differences might
exist. The information contained in this document is, however,
reviewed regularly and any necessary changes will be included in the
edition. We welcome suggestions for improvement.
Subject to technical changes without prior notice.
Siemens–Aktiengesellschaft