Axis Test Run - Siemens SINUMERIK FM-NC Installation And Startup Manual

9 Axis and Spindle Dry Run
9.2

Axis test run

9.2 Axis test run
Select JOG mode
and enable axis
Does the
axis move?
yes
Traversing
direction
OK?
yes
Set path 10 mm
Is path
evaluation
OK?
yes
1
9-198
Check enabling signals on drive
I/RF module:
FDD module:
Check interface signals (DB 31 – 48)
DBB0
DBX1.7
DBX1.5/1.6
DBX1.4
DBX1.3
DBX2.2
DBX2.1
DBX4.3
DBX5.0–5.5
DBX4.6/4.7
DBX20.1
DBX21.7
Check machine data
no
MD 32000–32050
MD 36000–36620
MD 32110
Service display
no
Check MD 32100: AX_MOTION_DIR
no
Check MD 31000 – 31080 (encoder matching)
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
Terminal 63 (pulse enable)
64 (drive enable)
48 (DC link start)
663 (pulse enable)
Feed compensation switch
Compensation active
Position measuring system 1/2
Follow-up mode
Axis disable
Delete distance to go
Controller enable
Feed stop/spindle stop
JOG–INC
Traversing keys
RFG IS (drive)
Pulse enable (611D)
Velocities
Monitoring functions
Actual value sign
 Siemens AG 2000 All Rights Reserved
03.96