Interface Signals Traverse Request And Motion Enable Drive Test - Siemens SINUMERIK FM-NC Installation And Startup Manual

04.00
03.96
10.3 Interface signals Traverse request and Motion enable
drive test
Explanation
Axes with a mechanical brake may need the brake to be activated in some
cases. For this, select the option Enable with PLC in the basic display of the
traverse function being used.
The request signal generated on selection of the measuring function Traverse
request drive test (DB31.DBX61.0) and acknowledgement signal Motion en-
able drive test (DB31.DBX1.0) can be gated accordingly in the PLC user pro-
gram.
This safety mechanism can be deselected via the "Enable without PLC" option.
Additional
The traversing range monitoring function can be deactivated for axes with an
information endless traversing range.
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition

10.3 Interface signals Traverse request and Motion enable drive test

10 Drive Optimization with Start-Up Tool
10
10-209