Overview Of Organization Blocks, Function Blocks And Dbs - Siemens SINUMERIK FM-NC Installation And Startup Manual

7 PLC Start-Up
7.2

Overview of organization blocks, function blocks and DBs

Parameters of FB1
7.2 Overview of organization blocks, function blocks and
DBs
7-184
FB 1 (power-up block of basic PLC program) must be supplied with variables.
For an exact description of the variables and the ways in which parameter
settings can be altered, please refer to
References: /FB/, P3, "Basic PLC Program"
Note
Timers T0 to T9 are used by the basic program.
References: /FB/, P3, "Basic PLC Program"
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
 Siemens AG 2000 All Rights Reserved
03.96
J