Siemens SINUMERIK FM-NC Installation And Startup Manual page 157

04.00
03.96
Fig. 6-28
Fig. 6-29
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
6 Assigning Parameters to the Control and the PLC Program
6.10 Linear motors (1FN1 and 1FN3 motors)
b) Is the linear motor not included in the list of linear motors?
––> unlisted motor
"Motor" field ––> enter data
Entering a motor without listed data
Enter the motor data:
Entered motor data for "unlisted motor"
6
6-157