Siemens SINUMERIK FM-NC Installation And Startup Manual page 271

12.98
03.96
6. Set parameters for the Norton Ghost program:
7. Restore the contents of the hard disk
8. After a successful restore, a reboot is performed automatically.
Time required:
for the generation of a compressed disk image =130 MB of a
540 MB hard disk via LPT.
Note
The backup of user data, machine data and start-up files is an integral function
of the MMC in the Services area.
The File Manager indicates where data to be backed up are located and in
what format, as well as what media can be used to save and re-import them.
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
11.4 Back up hard disk via Norton GhostR (SW 4.4 and higher)
– <1> configure ghost parameters:
see above
– <3> Harddisk Restore from <pathname>, mode PARALLEL
* When you select this menu, a message window appears:
You are prompted to check whether the connection
between MMC and PG/PC has been established.
The name of the image file from which data
are to be restored is displayed.
The image file must exist on the programming device/PC.
* PG/PC:
In a DOS window or at DOS level, enter
the command ghost -lps to start the
Norton Ghost program.
* MMC: "Y"
Start the restore by acknowledging the message window.
* MMC:
The message window of Norton Ghost appears:
The progress of the data transfer is displayed
The paths are displayed
The volume of data to be transferred is displayed
* Cancel the data transfer
PC: Press "Control" + "C" keys
The MMC boots. A boot diskette is required
for the MMC power-up.
– <4>Back to previous menu
Return to main menu
approx. 15–20 minutes
11 Data Backup
11-271
11