Print Graph - Siemens SINUMERIK FM-NC Installation And Startup Manual

05.98
03.96
10.8.7

Print graph

Printer setting
You can access the basic display for printer selection (Fig. 10-14) with softkeys
MMC \ Printer selection.
With the toggle key you can selection whether the graph displayed is to be sent
directly to the printer or to a bitmap file when actuating the softkey Print graph.
Fig. 10-14 Basic display of the printer selection
Direct output to
The printer must be set up under MS–Windows.
printer
Set "Output to printer" in the selection field.
In the display called "Display" you can press the softkey Print graph to output
the graph displayed to the connected printer.
Output to
You want to save the graph as a bitmap file (*.bmp).
bitmap file
In the selection field for printer setting, set "Output to bitmap file".
After you have pressed the Print graph softkey in the display called "Display",
the screen form for assigning a file name is displayed (Fig. 10-15). In the drop-
down list, you can enter a new file name or an existing file name for overwriting.
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
10 Drive Optimization with Start-Up Tool
10.8 Trace function (SW 4.2 and higher)
10
10-231