Protection Classes; Insulation Test; Protection Against Foreign Objects And Water - Siemens SIMATIC HMI TP700 Comfort Operating Instructions Manual

Technical information

7.5 Protection classes

7.5 Protection classes
7.5.1

Insulation test

The device meets the requirements according to EN 61131-2.
Circuits with a nominal voltage of U
Isolation tested with (Type Test)
7.5.2

Protection against foreign objects and water

The device meets the requirements according to EN 60529.
Device side
Front
Rear panel
The degree of protection of the device front can only be guaranteed if the mounting seal lies
flush against the mounting cutout. Read the corresponding information in section
"Preparing the mounting cutout (Page 17)".
28
to other circuits or ground
e
Degree of protection
When mounted:
IP66
•
Type 4X/Type 12 (Indoor/Outdoor)
•
IP20
•
protection against contact with standard test probes. There is no
protection against ingress by water.
Compact Operating Instructions, 03/2016, A5E35956909-AB
Test voltage
707 V DC
TP700 Comfort Outdoor, TP1500 Comfort Outdoor